PART 2
19100 Series Track 1-3/8" W x 3/4" H x .062"
19101 track & 19103 carrier shown


SPECIFICATIONS
19101 track is an anodized aluminum extrusion measuring1-3/8'' W x 3/4'' H and is considered the industry standard.

19103 carriers glide on the inside channels of the track on two 5/8'' nylon self lubricating wheels. The wheels are then attached to 1/8'' nylon axles on the carriage. An attached nickel plated steel bead chain (available in standard or custom lengths) is connected to a 1-7/16'' stainless steel hook.

19105 end stop fittings are made of 16-gauge anodized aluminum and attach to each end of the track to prevent accidental carrier removal.

19106 snap out fittings are made of 16-gauge anodized aluminum. One is required for each run of track for easy insertion and removal of carriers from installed track. The snap out fitting is installed in the 19105 end stop fitting.

19111 splicer fittings are made from anodized aluminum extrusions. They are used to align two pieces of adjoining track. The external splicer is designed to fit around the outside of the pieces of track to be aligned. Track runs longer than 16' require the use of a splicer.

19200 Series Track 1" W x 3/4" H x .070"
19201 track & 19203 carrier shown


SPECIFICATIONS
19201 track is an anodized aluminum extrusion measuring 1'' W x 3/4'' H and is a lighter weight alternative to the 19101 track.

19203 carriers have a self lubricating nylon body that glides along the inside edges of the track channel. It is surrounded by a rubber bumper ring to reduce noise. An attached nickel plated steel bead chain (available in standard or custom lengths) is connected to a 1-7/16'' stainless steel hook.

19205 end stop fittings are made of 16-gauge anodized aluminum and attach to each end of thetrack to prevent accidental carrier removal.

19206 snap out fittings are made of 16-gauge anodized aluminum. One is required for each run of track for easy insertion and removal of carriers from installed track. The snap out fitting is installed in the 19205 end stop fitting.

19211 splicer fittings are made of anodized aluminum. They are used to align two pieces of adjoining track. The internal splicer fits inside the walls of the track. Track runs longer than 16' require the use of a splicer.


Please visit Salsbury Industries' other on-line catalog,
Commercial and Residential Mailboxes, at www.mailboxes.com

Salsbury Industries, 1010 East 62nd Street, Los Angeles, CA 90001-1598
phone: 1-800-640-4341 int'l phone: (323) 846-6700
fax: 1-800-640-4345 int'l fax (323) 846-6800
email: hospitalhardware@salsbury.com
website: www.hospitalhardware.com

Copyright 2000 © Salsbury Industries. All Rights Reserved.